Safety Data Sheets (SDS) available to customers
Please login or register an account to access.
If you’re having difficulty logging in please try resetting your password
VICKERLUBE FG DRY PTFE SPRAY is designed for all applications where a dry film lubricant is required in the food and other clean industries such as cosmetics and the pharmaceutical industry. It is an excellent non-stick dry film lubricant with excellent temperature resistance. It is an ideal lubricant to use where wet lubricants are not suitable or can cause stress cracking of packaging. VICKERLUBE FG DRY PTFE SPRAY will not cause stress cracking in plastics and will not pick up dust and dirt.
Applications include: –
Shake can thoroughly before use. Apply a thin even coating onto surface from approximately 15 – 30 cm (6 to 12 inches). Apply VICKERLUBE FG DRY PTFE SPRAY sparingly. Store in a cool, dry place, out of direct sunlight. Storage temperature should be below 50°C.
VICKERLUBE FG DRY PTFE SPRAY | TEST METHOD | RESULT |
Appearance | Visual | White dry film |
Base Type | N/A | PTFE |
Propellant | N/A | Hydrocarbon |
Temperature Range (°C) | -50 to 260 | |
Shelf Life | – | 5 years in original sealed containers whilst stored out of direct sunlight |
Please login or register an account to access.
If you’re having difficulty logging in please try resetting your password
Vickers Oils, its officers, employees and agents assume no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with Vickers Oils for the provision of this information or advice and in that case responsibility or liability is exclusively on the terms and conditions set out in that contract. Products should only be used for the applications specified. The supplier cannot accept responsibility if they are used in any other applications.