Bearing and Gear Greases
The BIOGREASE EP range
The Environmentally Acceptable Grease combining corrosion protection with excellent resistance to wash off from rain and seawater
BIOGREASE EP offers improved operation and lower environmental risk leading to overall cost savings.
BIOGREASE EP is a Lithium/Calcium thickened lubricating grease based on fully saturated synthetic esters. It is available in NLGI 0 and NLGI 2 grades.
BIOGREASE EP2 is designed for the lubrication of bearings and as a protective coating for exposed equipment in sensitive environments where there is a potential for loss to occur, for example from multipurpose applications including antifriction and plain bearings, bushings and pins.
BIOGREASE EP0 has been specifically formulated for use in centralised lubrication systems to improve pumpability or where low temperature performance is required or as recommended by certain OEMs.
BIOGREASE EP has a biodegradability of greater than 60% in the 28 days OECD 301B test.
BIOGREASE EP2
High wear water resistant fully saturated NLGI 2 grease
Part no. 25892
BIOGREASE EP0
High Wear Water Resistant Fully Saturated NLGI 0 Grease
Part no. 25560
VICKERLUBE HV EP 1000-1.5
VICKERLUBE HV EP 1000-1.5 is a high viscosity, extreme pressure, aluminium complex thickened grease, formulated from high viscosity mineral base oils and selected additives. The high viscosity and EP additives make it particularly suitable for use in severe applications typically encountered in mining, quarrying, cement and other heavy industries.
VICKERLUBE HV EP 1000-1.5
High Viscosity Extreme Pressure NLGI 1.5 Grease
Part no. 25442
VICKERLUBE HD EP2
VICKERLUBE HD EP2 is a heavy duty, lithium complex, extreme pressure grease, formulated from mineral base oils and selected additives. The EP additives make it particularly suitable for use in severe applications typically encountered in mining, quarrying, cement and other heavy industries.
VICKERLUBE HD GREASE EP2
Heavy Duty Extreme Pressure NLGI 2 Grease (red)
Part no. 25271
VICKERLUBE OGL 1860- 0
VICKERLUBE OGL 1860-0 is an aluminum complex thickened grease formulated with high viscosity base oils and select additives to enhance water resistance and establish a tenacious lubricant film. Formulated to maintain separation of the gear teeth and bearing surfaces even when subjected to extreme forces that would normally create boundary lubrication conditions. The product is formulated with a special solid lubricant additive system for extreme operating conditions such as shock loading. It is designed to prevent metal-to-metal contact, eliminating the effect of galling and scuffing of tooth flanks or stress induced pitting in severe applications typically encountered in mining and other heavy industries.
VICKERLUBE OGL 1860- 0
Open Gear Lubricant NLGI 0 For Type 1 Gears
Part no. 25182
Trusted for Generations
An award-winning range of EALs (Environmentally Acceptable Lubricants)
Regional stock points
in over 40 locations
Ability and infrastructure to respond quickly to urgent requirements
Service & Support
30% of our workforce are employed in the technical team, focusing on Quality Control, R&D, OEM liaison and Technical Service allowing us to provide one-on-one dedicated customer support by our team of highly qualified experts.
Field Support
Lubrication Surveys and Recommendations
Equipment Reports
and Analysis
Lubricant
Analysis
